- Heavy Duty Rubber Cable Hump 2 Channel Malaysia – 1000 × 250 × 50mm
- Rubber Cable Protector & Cable Ramp Supplier Malaysia
- What Is a Rubber Cable Hump?
- Detailed Product Specifications
- Key Features & Benefits
- Common Applications of Rubber Cable Hump 2 Channel
- How to Install a 2-Channel Rubber Cable Hump
- Important Safety & Selection Considerations
- Rubber Cable Hump vs Underground Cable Protection Slab
- 2-Channel vs 3-Channel vs 5-Channel Cable Hump
- How Many Cable Humps Do I Need?
- Frequently Asked Questions (FAQ)
- Heavy Duty Rubber Cable Hump Supplier Kuala Lumpur & Selangor
Heavy Duty Rubber Cable Hump 2 Channel Malaysia – 1000 × 250 × 50mm
Rubber Cable Protector & Cable Ramp Supplier Malaysia
Looking for a Rubber Cable Hump 2 Channel in Malaysia to protect exposed electrical cables, extension cords or hoses across a work area?
The Heavy Duty Rubber Cable Hump 2 Channel is an above-ground cable protection product designed to help manage and protect cables laid across pedestrian pathways, temporary access routes and suitable vehicle crossing areas.
Constructed from high-density rubber, it features two internal cable channels, a hinged protective cover and a black-and-yellow high-visibility design.
Its textured crossing surface helps provide traction, while the sloped profile allows pedestrians and compatible wheeled traffic to pass over the protected cable route.
The product measures 1000mm (L) × 250mm (W) × 50mm (H), with two cable channels measuring 30mm (W) × 30mm (H) each.
With an approximate weight of 7.5kg per unit, it can be repositioned for temporary installations or secured using the four mounting holes where appropriate.
Buildmate Home Living Sdn Bhd welcomes enquiries from construction contractors, electrical contractors, industrial facilities, event organisers and project purchasers in Kuala Lumpur, Selangor and throughout Malaysia.
What Is a Rubber Cable Hump?
A Rubber Cable Hump, also called a Cable Protector Ramp, Cable Protection Hump or Cable Ramp, is a protective device installed above ground to cover cables, wires and compatible hoses crossing a walking or traffic area.
Exposed cables can create trip hazards and may be damaged when pedestrians, carts or vehicles pass over them.
A cable hump provides a designated crossing surface while housing the cables inside protective channels.
How Does a 2-Channel Cable Hump Work?
The cable hump contains two separate channels beneath a hinged protective cover.
- Open the protective cover.
- Place compatible cables or hoses inside the channels.
- Close the cover securely.
- Position the cable hump on a suitable surface.
- Secure the unit where required by the site conditions.
- Inspect the installation before allowing pedestrian or approved vehicle crossings.
The channels help keep cables organised and reduce direct exposure to crossing traffic.
Why Use a Cable Hump?
A cable hump can help:
- Protect exposed cables from direct contact with pedestrian and suitable wheeled traffic.
- Reduce the risk of cables being crushed, displaced or damaged.
- Provide a more organised temporary cable route.
- Make cable crossing areas more noticeable.
- Reduce cable-related trip hazards when properly installed.
- Allow cables to be accessed through the hinged cover.
- Support temporary and reusable cable management.
A cable hump is a protective accessory, not a guarantee against cable damage or accidents. Correct installation and traffic management remain essential.
Detailed Product Specifications

| Specification | Product Details |
|---|---|
| Product Name | Heavy Duty Rubber Cable Hump 2 Channel |
| Alternative Names | Cable Protector Ramp, Rubber Cable Ramp, Cable Protection Hump |
| Product Type | Above-Ground Cable Protection |
| Material | High-Density Rubber |
| Overall Length | 1000mm |
| Overall Width | 250mm |
| Overall Height | 50mm |
| Number of Cable Channels | 2 |
| Individual Channel Width | 30mm |
| Individual Channel Height | 30mm |
| Approximate Weight | 7.5kg per piece |
| Colour | Black and Yellow |
| Protective Cover | Hinged Cover |
| Surface Finish | Textured Crossing Surface |
| Mounting Holes | 4 |
| Installation Type | Surface-Mounted / Portable |
| Main Applications | Cable, Cord and Compatible Hose Protection |
| Selling Unit | Piece |
| Certified Load Rating | Not provided in the available product information |
| Maximum Vehicle Speed | Not specified |
| Suitable Vehicle Weight | Requires confirmation |
Important technical note: The product information describes use in pedestrian and vehicle crossing areas, but it does not provide a certified maximum load capacity, test standard or speed rating. Vehicle suitability must be confirmed before installation.
Key Features & Benefits
1. High-Density Rubber Construction
The cable hump is manufactured from high-density rubber intended for repeated use in suitable work environments.
The material is described as having resistance to tearing and abrasion, helping it withstand normal handling and use within its intended operating conditions.
2. Two Separate Cable Channels
The product includes two internal cable channels, each measuring 30mm wide × 30mm high.
These channels can accommodate compatible electrical cables, extension cords and hoses.
Separate channels can help organise different cable runs and prevent them from lying directly across the walking surface.
Selection reminder: Check the actual outside diameter and shape of the cable or hose before ordering. A nominal 30mm channel does not guarantee every 30mm cable or hose will fit comfortably.
3. High-Visibility Black and Yellow Design
The black rubber body and yellow protective cover create a contrasting appearance.
This helps people notice the cable crossing point, particularly in busy work areas.
High-visibility colouring supports awareness but does not replace warning signs, lighting or traffic controls where required.
4. Hinged Protective Cover
The hinged cover allows access to the cable channels without lifting the entire protector.
This is useful when installing, inspecting, rearranging or removing temporary cables.
The product literature describes a hinge arrangement without metal components.
5. Textured Crossing Surface
The surface has a textured pattern designed to improve grip for pedestrians and suitable wheeled traffic.
Actual traction depends on the condition of the surface, including water, dust, oil and other contamination.
No certified slip-resistance value is provided in the available specifications.
6. Low-Profile Sloped Design
The cable hump has a height of 50mm and sloped approaches.
This helps create a defined crossing over the protected cables rather than leaving loose cables exposed on the ground.
However, the raised profile can still present a trip or accessibility hazard if poorly positioned.
7. Four Mounting Holes
Four mounting holes allow the cable hump to be secured to a suitable surface when required.
The appropriate anchors and fixing method should be selected according to the substrate and project requirements.
Fixing hardware is not confirmed as included.
8. Portable and Reusable
The unit can be moved and reused in suitable temporary installations.
This makes it practical for construction projects, maintenance works, events and other locations where cable routing may change.
9. Helps Organise Temporary Cables
The internal channels keep cables within a designated protective route.
This can improve site organisation and reduce the amount of loose cable exposed in crossing areas.
10. Suitable for Multiple Work Environments
The product may be considered for construction, industrial, commercial and temporary installations where its dimensions and operating conditions are appropriate.
Common Applications of Rubber Cable Hump 2 Channel
Construction Sites
Suitable for protecting temporary power cables and compatible hoses crossing designated site walkways and controlled access routes.
Electrical & M&E Installation Works
Useful during temporary electrical installations, testing, equipment servicing and maintenance activities.
Factories & Industrial Facilities
May be used where temporary electrical cables or hoses cross internal work areas.
Warehouses & Logistics Facilities
Can help organise cable crossings in designated pedestrian or suitable equipment routes.
Important: Forklift and industrial vehicle loads must be verified before use.
Events, Exhibitions & Temporary Setups
Useful for managing temporary cables connected to lighting, audio, displays and other event equipment.
Building Renovation Projects
May be used to cover extension cables and temporary equipment connections across suitable work areas.
Commercial Maintenance Areas
Can help protect temporary cable routes during equipment servicing, repairs and maintenance operations.
Temporary Generator Installations
May be suitable for protecting compatible power cables crossing a designated temporary route, subject to electrical safety and site requirements.
How to Install a 2-Channel Rubber Cable Hump
Step 1 – Check the Installation Location
Select a stable, reasonably level surface suitable for the cable hump.
Check for uneven ground, loose debris, water accumulation and other conditions that may affect stability.
Step 2 – Confirm Cable Dimensions
Measure the outside diameter or cross-section of the cables or hoses.
Make sure they fit within the available 30mm × 30mm channels without excessive compression or sharp bending.
Step 3 – Open the Hinged Cover
Lift the yellow protective cover to access the two cable channels.
Inspect the hinge and cover for damage before use.
Step 4 – Position the Cables
Lay the cables or hoses into the channels.
Avoid forcing oversized cables into the protector or creating tight bends.
Step 5 – Close the Cover Securely
Close the hinged cover and check that it sits correctly.
Do not allow crossings if the cover cannot close properly.
Step 6 – Position or Secure the Cable Hump
Place the protector across the intended route.
Where necessary, use the mounting holes with a suitable fixing system to prevent movement.
Step 7 – Check the Crossing
Before allowing use, confirm that:
- The protector is stable.
- The cover is closed.
- Cables are not pinched.
- The crossing is visible.
- Pedestrian and vehicle movements have been assessed.
- Expected vehicle loads are within verified product limits.
Step 8 – Inspect Regularly
Check for movement, wear, damage, loose fixings and contamination during use.
Replace or remove damaged units.
Important Safety & Selection Considerations
Cable Size Compatibility
Each channel is listed as 30mm × 30mm.
The actual cable or hose dimensions must be checked before purchase.
Vehicle Load Capacity
Although the product is described for pedestrian and vehicle crossing applications, a certified maximum load rating is not available in the supplied information.
Do not assume suitability for heavy trucks, forklifts or other heavy equipment without written confirmation.
Installation Surface
The product should be installed on a suitable stable surface.
Additional fixing or traffic controls may be necessary depending on the location.
Pedestrian Accessibility
The cable hump has a raised profile. Evaluate the route for pedestrian accessibility, wheelchair use and trip hazards before installation.
Electrical Safety
The cable protector does not replace proper cable insulation, electrical protection, earthing or safe electrical installation practices.
Outdoor Exposure
Outdoor use should be assessed against drainage, weather conditions, surface stability and the intended installation duration.
Rubber Cable Hump vs Underground Cable Protection Slab
| Feature | Rubber Cable Hump | Underground Cable Protection Slab |
|---|---|---|
| Installation | Above ground | Underground |
| Primary Function | Protects surface cable crossings | Protects buried cable routes |
| Typical Material | Rubber | Plastic, concrete or other specified materials |
| Cable Access | Hinged cover | Usually requires excavation or removal |
| Portability | Portable | Generally part of a buried installation |
| Typical Use | Temporary cable management | Underground utility infrastructure |
Which Product Should You Choose?
Choose a Rubber Cable Hump when cables must cross an above-ground pedestrian or suitable traffic route.
Choose an Underground Cable Protection Slab when the project requires physical protection for buried cables.
These products are not interchangeable and should be selected according to the approved installation design.
2-Channel vs 3-Channel vs 5-Channel Cable Hump
| Product Type | Number of Channels | Typical Selection Reason |
|---|---|---|
| 2-Channel Cable Hump | 2 | Two compatible cable or hose routes |
| 3-Channel Cable Hump | 3 | Additional separate cable routes |
| 5-Channel Cable Hump | 5 | Multiple cable routes requiring separation |
The number of channels is only one selection factor. Channel dimensions, overall width, vehicle suitability and installation requirements may differ between models.
How Many Cable Humps Do I Need?
The product has a nominal length of 1000mm (1 metre).
For a straight crossing that can be formed using compatible adjoining units, the basic quantity estimate is:
Required Units = Crossing Width in Metres ÷ 1 Metre, rounded up.
| Crossing Width | Basic Quantity Estimate |
|---|---|
| 1m | 1 piece |
| 2m | 2 pieces |
| 3m | 3 pieces |
| 4m | 4 pieces |
| 5m | 5 pieces |
| 6m | 6 pieces |
Important: This calculation assumes the units can be connected or positioned safely together. Joining compatibility, end treatments and the actual usable coverage must be confirmed before ordering.
Frequently Asked Questions (FAQ)
1. What is a rubber cable hump?
A rubber cable hump is an above-ground protective ramp used to cover cables, cords and compatible hoses crossing a walkway or traffic area.
2. What is a 2-channel cable protector?
It is a cable protector with two separate internal channels for accommodating compatible cables or hoses.
3. What is the overall size?
The overall dimensions are 1000mm × 250mm × 50mm.
4. What is the channel size?
Each of the two channels measures 30mm wide × 30mm high.
5. What material is used?
The product is made from high-density rubber.
6. How much does the cable hump weigh?
Approximately 7.5kg per piece.
7. What colours are available?
The described product has a black body and yellow protective cover.
8. Can it protect electrical extension cables?
Yes, provided the cables fit the channels and the installation meets the relevant safety requirements.
9. Can I use it for water or air hoses?
Compatible hoses may be accommodated if their dimensions and operating conditions are suitable.
10. Can pedestrians walk over it?
It is intended for suitable pedestrian crossing applications, but the raised profile and site conditions must be assessed.
11. Can cars drive over it?
The product information describes vehicle crossing use, but does not establish a certified load rating. Confirm vehicle suitability before use.
12. Can forklifts cross the cable hump?
Forklift suitability has not been verified. Do not permit forklift crossings without confirmation of the permissible load and operating conditions.
13. Is the cable hump suitable for trucks?
The available product description mentions trucks, but does not provide a maximum permissible weight. Obtain the load specification before use.
14. Is the surface anti-slip?
It has a textured surface intended to improve traction. No certified slip-resistance rating is provided.
15. Can the yellow cover be opened?
Yes. The cable hump features a hinged cover for access to the internal channels.
16. Does the product have mounting holes?
Yes. Four mounting holes are listed.
17. Does it come with mounting screws?
The available product information does not confirm whether fixing hardware is included.
18. Is it portable?
Yes. It is intended for portable and reusable cable protection applications.
19. Can it be used outdoors?
It may be used in suitable outdoor conditions, subject to site assessment and confirmation of product suitability.
20. Can I use it at construction sites?
Yes, it can be considered for temporary cable crossings where the traffic and installation conditions are suitable.
21. Is it suitable for warehouses?
It may be used in suitable warehouse areas. Equipment loads and traffic conditions must be checked.
22. Can I join several units together?
Multiple units may be needed for wider crossings, but the joining method and compatibility must be confirmed.
23. What is the difference between 2-channel and 3-channel cable humps?
A 2-channel model has two cable passages, while a 3-channel model has three. Other dimensions and capacities may differ.
24. Where can I enquire about a rubber cable hump in Kuala Lumpur or Selangor?
Contact Buildmate Home Living Sdn Bhd with the required quantity, application and delivery location.
Heavy Duty Rubber Cable Hump Supplier Kuala Lumpur & Selangor
Looking for a Rubber Cable Hump 2 Channel Malaysia supplier for construction, industrial, electrical or temporary cable protection projects?
Buildmate Home Living Sdn Bhd welcomes enquiries from contractors, factories, warehouses, maintenance teams and project purchasers.
Contact us with your required quantity, cable dimensions, intended traffic conditions and delivery location for a quotation.
Buildmate Home Living Sdn Bhd
📲 WhatsApp us now: https://wa.me/60123538929
🌐 Website: https://buildmatehardware.com.my
✉️ Email: support@buildmatehardware.com.my
Send us your quantity and delivery location for a quotation.






