- Heavy Duty Rubber Cable Hump 3 Channel – 900 × 500 × 70mm
- 3-Channel Rubber Cable Protector & Cable Ramp
- What Is a 3-Channel Rubber Cable Hump?
- Detailed Product Specifications
- Key Features & Benefits
- Common Applications of Rubber Cable Hump 3 Channel
- How to Install a 3-Channel Rubber Cable Hump
- Important Safety Considerations
- 2-Channel vs 3-Channel Rubber Cable Hump
- How Many 3-Channel Cable Humps Do I Need?
- Frequently Asked Questions (FAQ)
- Heavy Duty Rubber Cable Hump 3 Channel Supplier Kuala Lumpur & Selangor
Heavy Duty Rubber Cable Hump 3 Channel – 900 × 500 × 70mm
3-Channel Rubber Cable Protector & Cable Ramp
Looking for a Rubber Cable Hump 3 Channel in Malaysia to protect exposed electrical cables, power cords and compatible hoses at construction sites, industrial facilities or temporary work areas?
The Heavy Duty Rubber Cable Hump 3 Channel is an above-ground cable protection ramp designed to accommodate three separate cable routes while providing a protective crossing surface.
The product features a black rubber body with a yellow hinged cover. Its three internal channels help keep cables organised and reduce direct contact with passing pedestrian or suitable vehicle traffic.
This model measures 900mm (L) × 500mm (W) × 70mm (H) and includes three channels, each measuring 60mm (W) × 50mm (H).
With an approximate weight of 15kg per piece, it is suitable for consideration in temporary and managed cable protection installations.
Buildmate Home Living Sdn Bhd welcomes enquiries from electrical contractors, construction companies, factories, warehouses, event organisers and project purchasers in Kuala Lumpur, Selangor and throughout Malaysia.
What Is a 3-Channel Rubber Cable Hump?
A 3-Channel Rubber Cable Hump, also known as a 3-Channel Cable Protector, Rubber Cable Ramp or Cable Protection Hump, is a protective ramp placed over cables or hoses running across the ground.
It contains three separate internal passages that accommodate compatible cables, cords or hoses.
Unlike underground cable protection slabs, a rubber cable hump is installed above ground and can be accessed without excavation.
How Does It Work?
The cable hump has a hinged protective cover that opens to expose the three cable channels.
Cables are positioned inside the channels before the cover is closed. The outer ramp body then provides a defined crossing surface.
This arrangement helps reduce direct contact between the cables and passing traffic.
Why Use a 3-Channel Cable Protector?
A 3-channel cable protector can help:
- Protect exposed cables and hoses from direct contact with crossing traffic.
- Organise multiple temporary cable routes.
- Reduce loose cables across walking or working areas.
- Make the crossing area more visible.
- Allow cable access through the hinged cover.
- Support temporary cable installations at construction and industrial sites.
- Improve cable routing and general worksite organisation.
Correct installation, cable compatibility and traffic assessment remain essential.
Detailed Product Specifications


| Specification | Product Details |
|---|---|
| Product Name | Heavy Duty Rubber Cable Hump 3 Channel |
| Alternative Names | 3-Channel Cable Protector, Rubber Cable Ramp, Cable Protection Hump |
| Product Type | Above-Ground Cable Protector |
| Material | Rubber |
| Overall Length | 900mm |
| Overall Width | 500mm |
| Overall Height / Thickness | 70mm |
| Number of Channels | 3 |
| Individual Channel Width | 60mm |
| Individual Channel Height | 50mm |
| Approximate Weight | 15kg per piece |
| Colour | Black and Yellow |
| Cover Design | Hinged Protective Cover |
| Installation | Above-Ground Surface Placement |
| Main Purpose | Cable and Compatible Hose Protection |
| Selling Unit | Piece |
| Certified Vehicle Load Rating | Not specified in available catalogue |
| Maximum Crossing Speed | Not specified |
| Mounting Hardware | Not confirmed |
| Channel Joining Compatibility | Requires confirmation |
Technical reference: The dimensions, channel sizes and approximate weight are based on catalogue page 2.13. The available information does not establish a certified maximum vehicle load rating.
Key Features & Benefits
1. Three Separate Cable Protection Channels
The cable hump features three individual channels, each measuring 60mm wide × 50mm high.
These channels allow compatible cables and hoses to be routed separately within the protective body.
This is useful when several temporary cable runs need to cross the same access route.
Important: Check the actual outside diameter, cable arrangement and bending requirements before ordering. The nominal channel dimensions do not guarantee that every cable measuring 60mm will fit.
2. Rubber Construction
The rubber body is intended to provide a protective crossing surface for compatible cables and hoses.
Rubber cable protectors are commonly selected for temporary cable management because they can be moved and reused.
Actual durability depends on operating conditions, vehicle loads, surface conditions and maintenance.
3. High-Visibility Black and Yellow Design
The black body and yellow protective cover create a noticeable contrast.
This helps identify the location of the cable crossing, especially in construction and industrial work areas.
Additional warning signs or barriers may still be necessary.
4. Hinged Protective Cover
The hinged cover provides access to the three internal cable channels.
This allows users to position, inspect and remove cables without dismantling the entire protector.
The cover must be fully closed and properly seated before crossings are permitted.
5. Wide 500mm Ramp Body
The product has an overall width of 500mm and a height of 70mm.
The ramp profile provides an approach to the raised protective section.
Its suitability for pedestrians, wheeled equipment and vehicles depends on the actual site conditions.
6. Larger Cable Channels
Each 60mm × 50mm channel is larger than the 30mm × 30mm channels listed for the separate 2-channel model.
This makes the 3-channel model worth considering when the project requires larger cable passages.
The correct model should always be selected using actual cable dimensions.
7. Portable Cable Protection
The cable hump can be considered for temporary installations where cable routes may need to change.
At approximately 15kg per piece, safe manual handling and positioning procedures should be followed.
8. Suitable for Multiple Project Environments
The product can be considered for construction sites, electrical works, industrial facilities and temporary event installations where its specifications are appropriate.
Common Applications of Rubber Cable Hump 3 Channel
Construction Sites
Helps organise temporary electrical cables and compatible hoses across designated construction site access routes.
Electrical & M&E Installation Works
Suitable for consideration during temporary power distribution, equipment testing, electrical installation and maintenance works.
Factories & Industrial Facilities
May be used where multiple cables or hoses need to cross suitable internal working areas.
Warehouses & Logistics Areas
Can help manage cable crossings in designated pedestrian or equipment routes.
Note: Forklift and other industrial vehicle load suitability must be verified before use.
Events & Exhibitions
Useful for temporary power, lighting, audio and equipment cable routing at controlled event installations.
Building Maintenance & Renovation
Can help protect temporary extension cables and compatible hoses used during servicing, repair and renovation works.
Temporary Generator Installations
May be used to protect compatible power cables crossing a temporary route, subject to the approved electrical and site safety requirements.
How to Install a 3-Channel Rubber Cable Hump
Step 1 – Assess the Installation Area
Choose a suitable, stable surface and assess the expected pedestrian and vehicle movements.
Check for uneven ground, loose debris and other conditions that may affect stability.
Step 2 – Measure the Cables or Hoses
Confirm the actual outside dimensions of each cable or hose.
Each channel measures 60mm wide × 50mm high.
Allow adequate clearance and avoid excessive cable compression or sharp bending.
Step 3 – Open the Protective Cover
Open the yellow hinged cover to access the three internal channels.
Inspect the cover and hinge before use.
Step 4 – Position the Cables
Place the compatible cables or hoses into the channels.
Arrange the cables so that they do not prevent the cover from closing.
Step 5 – Close the Cover
Close the hinged cover securely.
Check that the cables are not pinched or trapped.
Step 6 – Position the Cable Hump
Place the protector across the intended cable crossing route.
Use an approved securing method if required by the installation design. Fixing arrangements for this particular model must be confirmed.
Step 7 – Inspect Before Use
Check that the protector is stable, visible and correctly positioned.
Confirm that the expected traffic conditions are within verified product limits.
Step 8 – Carry Out Regular Inspections
Inspect the cable hump for wear, movement, damage and loose components.
Remove damaged or unsuitable units from service.
Important Safety Considerations
Vehicle Load Capacity
The available product catalogue does not provide a certified maximum vehicle load rating.
Do not assume unrestricted suitability for trucks, forklifts or heavy equipment.
Cable Dimensions
The internal channels measure 60mm × 50mm each. Confirm the actual cable or hose dimensions before ordering.
Surface Stability
Install the cable protector on a suitable stable surface. Poor positioning can cause movement or create additional hazards.
Pedestrian Accessibility
The product has a 70mm raised profile. Consider pedestrian access, wheelchair requirements and trip hazards when planning the crossing.
Electrical Safety
A rubber cable protector does not replace appropriate electrical insulation, cable protection devices, circuit protection or safe electrical installation practices.
Traffic Management
Use appropriate site controls and verify the suitability of the cable hump before allowing vehicles to cross.
2-Channel vs 3-Channel Rubber Cable Hump
| Specification | 2-Channel Cable Hump | 3-Channel Cable Hump |
|---|---|---|
| Overall Length | 1000mm | 900mm |
| Overall Width | 250mm | 500mm |
| Overall Height | 50mm | 70mm |
| Number of Channels | 2 | 3 |
| Channel Size | 30 × 30mm | 60 × 50mm |
| Approximate Weight | 7.5kg | 15kg |
| Cover | Hinged | Hinged |
| Main Difference | Narrower cable passages | Three larger cable passages |
Which Cable Hump Should You Choose?
Choose the 2-Channel Cable Hump when two smaller cable passages meet your installation requirements.
Choose the 3-Channel Cable Hump when you need three separate channels or larger cable passages measuring 60mm × 50mm.
The choice should be based on cable dimensions, installation width, traffic conditions and approved project requirements.
How Many 3-Channel Cable Humps Do I Need?
Each unit has a nominal length of 900mm (0.9 metres).
For a straight crossing, a preliminary quantity estimate can be calculated by dividing the required crossing width by 0.9 metres.
| Required Crossing Width | Estimated Quantity |
|---|---|
| 0.9m | 1 piece |
| 1.8m | 2 pieces |
| 2.7m | 3 pieces |
| 3.6m | 4 pieces |
| 4.5m | 5 pieces |
| 5.4m | 6 pieces |
Formula:
Required Quantity = Crossing Width ÷ 0.9m, rounded up.
This is an approximate planning calculation only. Confirm the joining arrangement, actual coverage, end protection and installation suitability before ordering.
Frequently Asked Questions (FAQ)
1. What is a 3-channel rubber cable hump?
It is an above-ground cable protector with three internal passages designed to accommodate compatible cables or hoses across a crossing area.
2. What is a 3-channel cable protector used for?
It helps organise and protect exposed cables, cords and compatible hoses at temporary or managed crossing locations.
3. What is the overall size?
The dimensions are 900mm × 500mm × 70mm.
4. How many cable channels does it have?
It has three separate cable channels.
5. What is the size of each channel?
Each channel measures 60mm wide × 50mm high.
6. What material is used?
The product belongs to the rubber cable hump range.
7. How much does it weigh?
Approximately 15kg per piece.
8. What colour is the cable hump?
The product photographs show a black body with a yellow protective cover.
9. Does it have a hinged cover?
Yes. The product photographs show an opening hinged cover.
10. Can it protect electrical cables?
Yes, provided the cables fit the channels and the installation is suitable.
11. Can it accommodate hoses?
Compatible hoses may be accommodated if their dimensions and operating requirements are suitable.
12. Can pedestrians walk over it?
It may be used in suitable pedestrian crossing areas, subject to accessibility and site safety assessment.
13. Can cars drive over it?
Vehicle suitability must be confirmed because a certified maximum load rating is not provided.
14. Can heavy trucks cross this cable hump?
Do not assume heavy-truck suitability without written confirmation of the permissible load.
15. Is it suitable for forklifts?
Forklift suitability has not been verified and must be confirmed before use.
16. Can the cable hump be used outdoors?
It may be considered for suitable outdoor installations, subject to weather exposure, surface conditions and product suitability.
17. Can it be used at construction sites?
Yes, for suitable temporary cable crossing applications.
18. Is it suitable for factories and warehouses?
It may be suitable for designated cable crossing areas where traffic conditions are compatible with the product.
19. Can it be used for events?
Yes, it may be considered for temporary electrical and equipment cable management.
20. Can multiple cable humps be joined together?
Multiple units may be required for wider crossings, but the joining arrangement and compatibility must be confirmed.
21. What is the difference between 2-channel and 3-channel cable humps?
The 3-channel model has three 60mm × 50mm channels, while the 2-channel model has two 30mm × 30mm channels.
22. Is the 3-channel cable hump portable?
It can be repositioned for suitable temporary installations, with appropriate handling for its approximate 15kg weight.
23. How many units are needed for a 3.6-metre crossing?
Four units provide a nominal combined length of 3.6 metres, assuming a compatible joining and installation arrangement.
24. Where can I enquire about a 3-channel rubber cable hump in Malaysia?
Contact Buildmate Home Living Sdn Bhd with the required quantity, cable dimensions, intended application and delivery location.
Heavy Duty Rubber Cable Hump 3 Channel Supplier Kuala Lumpur & Selangor
Looking for a Rubber Cable Hump 3 Channel Malaysia supplier for electrical, construction, industrial or temporary cable protection projects?
Buildmate Home Living Sdn Bhd welcomes enquiries from contractors, factories, warehouses, maintenance teams and project purchasers.
Contact us with your required quantity, cable dimensions and delivery location for a quotation.
Buildmate Home Living Sdn Bhd
📲 WhatsApp us now: https://wa.me/60123538929
🌐 Website: https://buildmatehardware.com.my
✉️ Email: support@buildmatehardware.com.my
Send us your required quantity and delivery location for a quotation.




