SikaGrout 214 MY – High-Performance Cementitious Grout for Structural Grouting Works
SikaGrout 214 MY is a ready-to-use, cement-based, shrinkage-compensated grout developed for structural and general-purpose grouting applications. It is supplied as a grey premixed powder and requires only the addition of clean water to produce a high-flow, high-strength grout suitable for demanding construction conditions.
This product is designed for grouting works where reliability, strength, and ease of application are essential. Once mixed, SikaGrout 214 MY forms a dense, homogeneous grout that flows easily into gaps, cavities, and recesses, ensuring proper load transfer and long-term structural stability.
🔍 What Is SikaGrout 214 MY? (Simple Explanation)
SikaGrout®-214 MY is a cementitious grouting material used to fill spaces between concrete, steel, or other structural components. It is commonly applied where precise alignment and strong support are required, such as under machinery bases or precast columns.
The product is formulated with:
High-quality cement
Selected fillers and aggregates
Special additives for flow and controlled expansion
A key feature of SikaGrout®-214 MY is its 2-step expansion mechanism, which compensates for shrinkage during setting and hardening. This results in a dense, non-shrink grout that maintains close contact with surrounding surfaces after curing.
In addition, the grout is non-corrosive, non-toxic, iron-free, and chloride-free, making it suitable for use around steel reinforcement, anchor bolts, and structural steel elements.
🧱 Usage / Applications
SikaGrout®-214 MY is suitable for grouting works with a clearance of 10 mm or more.
It is recommended for the following applications:
🏗️ Machine foundations
🧱 Columns in precast constructions
🔩 Concrete anchors
🌉 Bridge bearings
🕳️ Cavities
↔️ Gaps
🔲 Recesses
🚆 Rail beds
⚠️ Important: Always ensure the minimum grout thickness is 10 mm to achieve proper flow and performance.
✨ Advantages & Key Benefits
SikaGrout®-214 MY is an economical and easy-to-use material requiring only the addition of water. Its main advantages include:
✔️ Easy to mix and apply
✔️ Good flow characteristics for effective gap filling
✔️ Rapid strength development for faster construction progress
✔️ High ultimate strength suitable for structural support
✔️ Impact resistant
✔️ Non-corrosive
✔️ Non-toxic
✔️ Iron and chloride free, reducing corrosion risk
✔️ Dense and non-shrink, due to 2-step expansion
✔️ Extended working time, allowing better handling on site
These benefits make SikaGrout®-214 MY a dependable solution for both civil engineering and industrial construction projects.
🛠️ How to Use SikaGrout 214 MY
1️⃣ Surface Preparation
Ensure all surfaces are clean, sound, and free from dust, oil, grease, and loose particles
Formwork must be tight and secure to prevent leakage
Pre-wet concrete surfaces if necessary, but remove all standing water before grouting
2️⃣ Mixing
Add the required amount of clean water into a clean mixing container
Slowly add SikaGrout®-214 MY powder while mixing
Mix using a low-speed mechanical mixer until a smooth, lump-free consistency is achieved
Typical mixing time: 3–5 minutes
3️⃣ Application
Pour the grout immediately after mixing
Maintain continuous placement to avoid air entrapment
Allow the grout to flow naturally into gaps and cavities
Light tamping or controlled vibration may be used if required
4️⃣ Curing
Protect the grout from rapid drying
Keep exposed surfaces moist during early curing
Proper curing improves strength development and long-term performance
📦 Packaging
25 kg bag
Supplied as a ready-mixed dry powder for consistent quality and easy site handling.
🎨 Colour
Grey premixed powder
🔚 Conclusion
SikaGrout 214 MY is a reliable, high-performance cementitious grout designed for structural grouting works with clearances of 10 mm or more. Its good flow characteristics, rapid strength development, and high ultimate strength make it suitable for demanding applications such as machine foundations, precast columns, concrete anchors, bridge bearings, rail beds, cavities, gaps, and recesses.
With its dense and non-shrink performance through a 2-step expansion mechanism, SikaGrout®-214 MY ensures effective load transfer and long-term stability after curing. The grout is easy to mix and apply, requires only water addition, and offers extended working time for improved on-site flexibility.
Being non-corrosive, non-toxic, and iron- and chloride-free, SikaGrout®-214 MY is safe for use in contact with steel and reinforcement. Supplied in 25 kg bags as a grey premixed powder, it provides consistent quality and dependable performance.
Overall, SikaGrout 214 MY is an economical and dependable solution for contractors and engineers who require strength, durability, and ease of application in structural grouting projects.
