Detectable Underground Warning Tape 150mm x 300m

**Notes:
*All listed prices are indicative only. For updated pricing, building materials, or bulk orders, please contact us via WhatsApp for a special offer.

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, colour, and other relevant characteristics.

Table of Contents

Detectable Underground Warning Tape 150mm x 300m with aluminium foil backing for buried utility identification

Detectable Underground Warning Tape 150mm x 300m

Detectable Underground Warning Tape is designed to help identify and warn of buried utility services during excavation, maintenance and construction activities.

The product combines a highly visible printed warning tape with an aluminium foil backing, allowing the buried tape to be located using compatible metal detection equipment under suitable installation conditions.t

This underground warning tape is available in a standard size of 150mm (W) x 300m (L), with different warning messages for electrical cables, telecommunications cables, ELV systems and sewer lines.

It is suitable for consideration in electrical infrastructure projects, civil engineering works, utility trenching, telecommunications installations and data centre utility infrastructure.

Buildmate Home Living Sdn Bhd welcomes enquiries from contractors and project purchasers in Kuala Lumpur, Selangor and throughout Malaysia.

Key Features & Benefits

1. Aluminium Foil Backing for Metal Detection

The detectable tape incorporates an aluminium foil layer that allows it to be located using suitable metal detection equipment.

This provides an additional method of identifying buried utility routes alongside the visible warning message.

Actual detectability depends on the installation conditions, depth, continuity of the metallic layer and detection equipment.

2. Visible Warning for Buried Utilities

The tape features clearly printed warning messages that alert excavation workers to the potential presence of underground services.

Available warning messages include electrical cables, telecom cables, ELV cables and sewer lines.

3. Waterproof & Weather-Resistant

The manufacturer describes the tape as waterproof and weather-resistant, with resistance to water, oil and solvents.

These characteristics support its intended use in suitable underground environments.

4. Durable Permanent Printing

The printed warning messages are designed to remain legible under normal buried installation conditions.

The manufacturer also describes resistance of the markings to common chemicals encountered in the ground.

5. PE Material Suitable for Direct Burial

The product uses a special polyethylene (PE) material intended for underground warning tape applications.

Its lightweight and flexible construction makes it practical for laying along specified buried utility routes.

6. Custom Warning Messages Available

Different projects may require specific utility identification wording.

offers a custom-wording variant, with custom colours and other requirements subject to manufacturer confirmation.

7. Suitable for Infrastructure & Data Centre Projects

The product may be specified for underground utility installations associated with electrical infrastructure, telecommunications networks, civil engineering works and data centre construction.

Final selection must follow the approved project specifications.


Product Specifications

SpecificationDetails
Product NameDetectable Underground Warning Tape
Product TypeDetectable buried utility warning tape
Standard Width150mm
Standard Length300m per roll
Base MaterialSpecial PE material
Detectable ComponentAluminium foil backing
Available ColoursRed, Orange and Custom
PrintingPermanent warning messages
Water ResistanceManufacturer-described waterproof
Weather ResistanceManufacturer-described weather-resistant
InstallationSuitable for specified direct-burial warning applications
Detection MethodCompatible metal detection equipment
Packaging UnitRoll
CustomisationCustom wording, with other options upon enquiry

Available Types & Product Codes

Item CodeWarning MessageColourSize
DSSB-DUWT-ELEC-150-RCAUTION! ELECTRICAL CABLE BELOWRed150mm x 300m
DSSB-DUWT-SEWE-150-RCAUTION! BURIED SEWER LINE BELOWRed150mm x 300m
DSSB-DUWT-TELE-150-ODANGER! TELECOM CABLE BELOW / BAHAYA! KABEL TELEKOM DI BAWAHOrange150mm x 300m
DSSB-DUWT-ELV-150-ODANGER! ELV CABLE BELOW / BAHAYA! KABEL ELV DI BAWAHOrange150mm x 300m
DSSB-DUWT-150Custom Warning MessageCustom150mm x 300m

Other printed messages and colours shown in promotional materials should be confirmed for ordering before being advertised as standard stock variants.


Technical Performance Data

The following performance figures are reproduced from the supplied Detectable Underground Warning Tape flyer.

PropertyReferenced Test MethodReported Result
ThicknessASTM D2103-23a110–150 microns
Tensile Strength (Force at Peak)ASTM D882550–650 N/50mm
ElongationASTM D882 / ASTM D5034-2115–25%
Grab TensileASTM D5034-21650–750 N
Tear ResistanceASTM D1004-2145–55 N
Puncture ResistanceASTM F1306-2115–25 N
Acid ResistanceASTM D543-21Pass – No disintegration
Alkaline ResistanceASTM D543-21Pass – No disintegration
RoHS Directive 2011/65/EU Annex IIAs stated in flyerNot detected (Complied)

Technical Note: These are flyer-reported performance values, not independently verified test results. The flyer states that values represent average test results and are subject to variation. Customers requiring certified performance, RoHS documentation or compliance evidence should request the relevant manufacturer test reports before ordering.


Common Applications

Underground Electrical Cable Installations

Used as a warning and identification layer above buried electrical cables in accordance with approved installation specifications.

Telecommunication Cable Routes

Suitable for specified underground telecommunications infrastructure where a printed warning tape is required.

ELV Cable Installations

Available with warning messages intended for extra-low-voltage cable routes.

Underground Sewer Lines

A dedicated sewer warning tape variant is available for suitable buried sewer utility identification.

Data Centre Construction

May be used in underground electrical and telecommunications utility installations associated with data centre infrastructure projects.

Civil Engineering & Utility Trenching

Provides a warning layer for future excavation activities where buried utilities need to be identified.

Infrastructure Maintenance

Supports identification of buried utility routes during subsequent maintenance and excavation work.


How to Install Detectable Underground Warning Tape

Step 1 – Identify the Utility Type

Choose the correct warning message for electrical, telecommunications, ELV, sewer or another specified underground service.

Step 2 – Confirm Project Requirements

Check the approved drawings for tape width, colour, installation depth, separation distance and detectable warning tape requirements.

Step 3 – Prepare the Underground Utility Trench

Complete the required utility installation and initial backfilling according to the project specifications.

Step 4 – Lay the Warning Tape

Position the tape along the buried utility route at the level specified in the approved installation drawings.

Step 5 – Maintain the Required Detection Arrangement

Where continuous metal detection is required, follow the project-approved joining, continuity and termination method.

Step 6 – Complete Backfilling

Carry out the remaining backfilling and compaction in accordance with the approved site procedure.

Step 7 – Verify Where Required

Use compatible detection equipment to check the installed route when required by the project.

Important: The manufacturer catalogue does not prescribe a universal burial depth, metallic continuity method or maximum detection depth. Follow the relevant authority and project requirements.


Detectable vs Standard Underground Warning Tape

FeatureDetectable Warning TapeStandard Warning Tape
Visible warning messageYesYes
Intended for buried utility warningYesYes
Aluminium foil backingYesNot specified for the standard DSSB tape
Metal detectionDesigned for detection with suitable equipmentNot claimed
Main functionWarning and detectable route identificationVisual warning during excavation
Available roll size150mm x 300mOther sizes listed separately

Which Type Should You Choose?

Choose Detectable Underground Warning Tape when the approved project specification requires a warning tape with a metallic detectable component.

Choose Standard Underground Warning Tape when a visual warning layer is specified without a metal-detection requirement.

Both products should be selected according to the approved utility installation design.


Quantity Calculation

The standard roll length is 300 metres.

Required Route LengthMinimum Full Rolls
300m1 roll
600m2 rolls
900m3 rolls
1,000m4 rolls
1,500m5 rolls
3,000m10 rolls

Formula:

Number of Rolls = Total Required Length ÷ 300m, rounded up to the next whole roll.

Allow additional material for overlapping, cutting, wastage, route changes and project-specific installation requirements.


Frequently Asked Questions (FAQ)

1. What is detectable underground warning tape?

It is a buried utility warning tape with a metallic component that allows it to be located using suitable detection equipment.

2. What is the standard size of detectable underground warning tape?

The manufacturer catalogue lists 150mm width x 300m length per roll.

3. What makes the warning tape detectable?

The tape incorporates aluminium foil backing that supports metal detection.

4. Can detectable warning tape be located using a metal detector?

Yes, it is designed for this purpose. Actual detection performance depends on equipment compatibility, installation depth and site conditions.

5. Is the tape suitable for underground electrical cables?

Yes. lists an electrical cable variant printed with CAUTION! ELECTRICAL CABLE BELOW.

6. Is there a warning tape for telecommunication cables?

Yes. The catalogue lists a telecom warning tape with English and Bahasa Malaysia wording.

7. Can this tape be used for ELV cable installations?

Yes. A dedicated ELV warning tape variant is available.

8. Is there a detectable warning tape for buried sewer lines?

Yes. lists a red tape printed with CAUTION! BURIED SEWER LINE BELOW.

9. Can I order custom warning messages?

Yes. The manufacturer lists a custom-wording product option, subject to confirmation.

10. What colours are available?

Standard catalogue variants include red and orange, with custom colour options upon enquiry.

11. Is detectable underground warning tape waterproof?

The manufacturer describes the product as waterproof and weather-resistant.

12. What material is used to manufacture the tape?

The catalogue describes special PE material with aluminium foil backing.

13. Is the tape suitable for direct burial?

Yes. The manufacturer identifies the PE material as appropriate for direct tape burial.

14. What is the difference between detectable and non-detectable warning tape?

Detectable warning tape incorporates a metallic component for locating with suitable equipment, while standard warning tape primarily provides a visual warning.

15. How deep should underground warning tape be installed?

The correct depth depends on the project drawings, utility type and relevant authority requirements. No universal depth is specified in the catalogue.

16. Can the tape be used for data centre projects?

It may be suitable for specified underground utility installations associated with data centre construction.

17. Will the printed wording remain visible underground?

The manufacturer describes permanent printing designed to resist normal burial conditions and common underground chemicals.

18. Is the tape resistant to oil and solvents?

The manufacturer describes resistance to water, oil and solvents. Specific exposure limits are not provided.

19. How many metres are supplied in one roll?

The listed detectable warning tape variants contain 300 metres per roll.

20. How many rolls are needed for a 1,000-metre project?

At least four rolls are required, before allowing for overlaps, wastage and installation requirements.

21. Can detectable warning tape replace concrete cable protection slabs?

Not automatically. Warning tape and physical cable protection slabs perform different functions. Follow the approved underground cable protection design.

22. Is this detectable warning tape TNB-approved or SIRIM-certified?

The supplied catalogue and flyer do not establish specific TNB approval or SIRIM product certification. Request supporting documents if these are required.

23. Does the tape comply with RoHS requirements?

The supplied flyer reports a RoHS Directive screening result as compliant. Obtain the relevant test report or declaration before relying on this claim for contractual compliance.

24. Where can I enquire about detectable underground warning tape in Kuala Lumpur or Selangor?

Contact Buildmate Home Living Sdn Bhd with the required warning message, product code, roll quantity and delivery location for a quotation enquiry.


Detectable Underground Warning Tape Supplier – Kuala Lumpur & Selangor

Looking for Detectable Underground Warning Tape 150mm x 300m Malaysia for an electrical, telecommunications, civil engineering or infrastructure project?

Buildmate Home Living Sdn Bhd welcomes enquiries from:

  • Electrical and M&E contractors
  • Civil engineering contractors
  • Telecommunications contractors
  • Infrastructure project teams
  • Data centre construction contractors
  • Project purchasing departments
  • Utility installation and maintenance teams

Contact us for product specifications, available variants, quotations and delivery arrangements.

Buildmate Home Living Sdn Bhd

📲 WhatsApp us now: https://wa.me/60123538929

🌐 Website: https://buildmatehardware.com.my

✉️ Email: support@buildmatehardware.com.my

Send us your required product type, quantity and delivery location for a quotation.