Heavy Duty Rubber Cable Hump 5 Channel – 920 × 500 × 50mm

**Notes:
*All listed prices are indicative only. For updated pricing, building materials, or bulk orders, please contact us via WhatsApp for a special offer.

Disclaimer
All product images shown are for illustration purposes only. Actual products may vary in terms of size, type, brand, version, colour, and other relevant characteristics.

Table of Contents

Heavy duty rubber cable hump 5 channel black and yellow cable protector Malaysia

Heavy Duty Rubber Cable Hump 5 Channel 

5-Channel Rubber Cable Protector & Cable Ramp 

Looking for a Heavy Duty Rubber Cable Hump 5 Channel in Malaysia?

The Heavy Duty Rubber Cable Hump 5 Channel is a surface-mounted rubber cable protection ramp designed to accommodate multiple electrical cables, power cords, wires and compatible hoses.

It helps protect exposed cables from direct contact with pedestrian and suitable vehicle traffic while keeping temporary cable routes organised.

The cable protector features five separate channels, a hinged protective cover and a black-and-yellow design that helps make the crossing more visible.

Buildmate Home Living Sdn Bhd offers quotation enquiries for construction, electrical, industrial and infrastructure projects in Kuala Lumpur, Selangor and throughout Malaysia.

What Is a Rubber Cable Hump 5 Channel?

A Rubber Cable Hump 5 Channel, also known as a 5-Channel Cable Protector Ramp, is an above-ground protective ramp with five internal cable passages.

It is commonly used where temporary cables or hoses must cross walkways, access routes or work areas.

Cables are placed inside the channels, and the hinged cover is closed to provide a protective crossing surface.

Unlike underground cable protection slabs, this product is installed on the ground surface and does not require excavation.

Available Sizes & Specifications

Rubber Cable Hump 5 Channel size detail

Specification800mm Model920mm Model
Overall length800mm920mm
Overall width450mm500mm
Overall height80mm50mm
Number of channels55
Individual channel width35mm35mm
Individual channel height35mm35mm
Approximate weight13.5kg14kg
MaterialRubberRubber
ColourBlack / YellowBlack / Yellow
InstallationAbove groundAbove ground
Selling unitPiecePiece

Note: The maximum permissible vehicle load is not stated in the available catalogue and must be confirmed before vehicle use.

Key Features & Benefits

Five Separate Cable Channels

The cable hump provides five internal passages, each measuring 35mm wide × 35mm high for the two listed models.

The channels help separate and organise multiple compatible cable or hose runs.

High-Density Rubber Construction

The rubber construction is described as resistant to tearing and abrasion, making it suitable for consideration in repeated-use cable protection applications.

Hinged Protective Cover

The hinged cover allows users to install, inspect and remove cables conveniently.

The cover should be fully closed before the crossing is used.

High-Visibility Black and Yellow Design

The contrasting colours make the cable crossing easier to identify in construction, industrial and temporary work areas.

Textured Crossing Surface

The textured surface is intended to provide traction for pedestrian and suitable wheeled traffic.

Actual grip depends on surface conditions and maintenance.

Portable and Reusable

The cable hump can be repositioned for different temporary projects, subject to safe handling and installation requirements.

Optional Fixed Installation

The cable hump range is described as having mounting holes for fixed applications. Confirm the fixing arrangement and hardware requirements for the selected model.

Common Applications

Construction Sites

Protecting temporary electrical cables and compatible hoses along designated construction access routes.

Electrical & M&E Works

Managing power cables during temporary electrical installation, testing and maintenance.

Factories and Industrial Facilities

Organising cables or hoses crossing suitable internal work areas.

Warehouses

Protecting temporary cable routes in designated crossing areas, subject to verification of equipment and vehicle loads.

Events and Exhibitions

Managing temporary power, lighting, audio and equipment cables.

Building Renovation

Protecting extension cords and temporary electrical connections during renovation and maintenance works.

Temporary Generator Installations

Providing cable protection for compatible temporary power connections where specified.

How to Install a 5-Channel Rubber Cable Hump

  1. Inspect the installation area. Choose a stable, suitable surface.
  2. Measure the cables. Confirm that the cables or hoses fit the 35 × 35mm channels.
  3. Open the protective cover. Inspect the cover and hinges before installation.
  4. Position the cables. Place compatible cables into the five channels without excessive bending or compression.
  5. Close the cover securely. Make sure cables are not pinched.
  6. Position or secure the ramp. Follow the approved installation requirements.
  7. Inspect before use. Confirm stability, visibility and suitability for the expected traffic.
  8. Maintain regularly. Check for movement, wear or damage.

Safety reminder: Do not assume the cable hump is suitable for forklifts, trucks or heavy vehicles without verified load-capacity information.

800mm vs 920mm Rubber Cable Hump

800 × 450 × 80mm

  • Five 35 × 35mm cable channels
  • Approximately 13.5kg
  • Overall width of 450mm
  • Overall height of 80mm

Suitable for consideration where the installation requires these dimensions and the raised profile is acceptable.

920 × 500 × 50mm

  • Five 35 × 35mm cable channels
  • Approximately 14kg
  • Overall width of 500mm
  • Overall height of 50mm

Suitable for consideration where a longer unit and lower overall height are required.

Selection tip: Both models have the same channel dimensions. Choose based on the required overall size, crossing arrangement and site conditions.

Frequently Asked Questions

1. What is a 5-channel rubber cable hump?

It is an above-ground cable protection ramp with five internal passages for compatible cables and hoses.

2. What is it used for?

It helps protect and organise exposed cables crossing suitable pedestrian or vehicle routes.

3. What sizes are listed for this Buildmate product?

The two selected options are 800 × 450 × 80mm and 920 × 500 × 50mm.

4. How many cable channels does it have?

Both models have five channels.

5. What is the channel size?

Each channel measures 35mm wide × 35mm high.

6. What material is used?

Rubber.

7. How much does the 800mm model weigh?

Approximately 13.5kg.

8. How much does the 920mm model weigh?

Approximately 14kg.

9. What colour is the cable hump?

Black with a yellow protective cover.

10. Does it have a hinged cover?

Yes. The hinged cover provides access to the cable channels.

11. Can it protect electrical cables?

Yes, when the cables fit the channels and the installation is suitable.

12. Can it accommodate hoses?

Compatible hoses may be used if their dimensions and operating requirements are appropriate.

13. Can pedestrians walk over it?

It may be used in suitable pedestrian crossing areas, subject to accessibility and site safety requirements.

14. Can cars drive over it?

Vehicle suitability must be verified because a certified maximum load rating has not been provided.

15. Can forklifts or heavy trucks cross it?

Do not assume suitability without written confirmation of the permissible load.

16. Is it suitable for outdoor use?

It may be considered for suitable outdoor applications after assessing weather exposure and surface conditions.

17. Can it be used at construction sites?

Yes, for compatible temporary cable crossing applications.

18. Is it suitable for warehouses?

It may be suitable for designated crossing areas, provided traffic conditions are compatible.

19. Can it be used for events?

Yes, for appropriate temporary electrical and equipment cable management.

20. Can multiple units be installed together?

Multiple units may be required for wider crossings. Confirm joining compatibility and installation requirements.

21. What is the difference between the 800mm and 920mm models?

They have different overall dimensions and weights, but both provide five 35 × 35mm channels.

22. Can the cable hump be reused?

Yes, provided it remains in suitable condition.

23. Can the cable hump replace underground cable slabs?

No. Rubber cable humps are used above ground, while underground cable slabs protect buried cable routes.

24. Where can I enquire about a 5-channel rubber cable hump in Malaysia?

Contact Buildmate Home Living Sdn Bhd with your required model, quantity and delivery location.

Rubber Cable Hump 5 Channel Supplier Kuala Lumpur & Selangor

Looking for a Rubber Cable Hump 5 Channel Malaysia supplier?

Buildmate Home Living Sdn Bhd welcomes enquiries from construction contractors, electrical contractors, factories, warehouses and infrastructure project purchasers.

Buildmate Home Living Sdn Bhd

📲 WhatsApp us now: https://wa.me/60123538929

🌐 Website: https://buildmatehardware.com.my

✉️ Email: support@buildmatehardware.com.my

Send us your required size, quantity and delivery location for a quotation.